DATA SHEET
Product: Tuff Satin Finish
Product Description: Tuff Satin Finish is a solvent based single pack moisture cured polyurethane of high solids. This product developed using latest technology in micronized waxes, preventing rejections and improving scratch resistance properties.
Product Properties:
  • Gloss Level
  • Satin
  • Clean Up
  • Tuff Cleaning Solvent manufactured by Tuff Coat Australia.
  • Health Risk
  • Poisonous flammable liquid, volatile component solvent S100 conforms to safety standards EEC Free lsonomer & Hydrocarbon levels.
    Application: Tuff Satin Finish is designed to be used as a final coat to provide nice satin finish.
    Packaging: 10 Litre - plastic pails
    5 Litre - plastic can
    Coverage: 8-10 square meters per litre.
    Caring for Tuff Satin Finish: Although complete curing of Tuff Satin Finish takes some 7 10 days, it is able to be walked on within 24 hours. It is suggested care be exercised in the use of the floor over this period. Avoid dragging furniture over the surface, use protective mats in high traffic area. To extend the life of the floor, place protective mats under furniture legs. Sweep the floor thoroughly and wash with warm water & mentholated spirits. The surface should be recoated BEFORE it has worn down to the cork or timber.
    Safe Handling: Handling and usage of this product must be carried out under well ventilated conditions that prevent inhalation of vapours. Wear a respirator that prevents inhalation of vapours. Asthmatics take extra care. Prevent skin contact by wearing impervious gloves. Breathing vapour is harmful and may cause lung irritation and allergic respiratory reaction. Irritates skin and eyes. This product must be kept firmly lidded as it deteriorates upon exposure to air. If using only a portion of contents, reseal the container immediately. In case of spillage, absorb into dry sand or earth. Remove from work area, cover with water for 24 hours before disposal.
    Warning Flammable: This product contains flammable solvents. When using this product, adequate ventilation to the outside must be provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing switches etc) must be secured in or near the working area. DO NOT SMOKE. Keep container closed when NOT in use.
    Warranty: In the interests of achieving a better product through research and improvements in manufacturing process, Tuff Coat Australia reserves the right to change specifications without notice. Since Tuff Coat Australia has no control over product application, buyers and users must make their own assessment of our products under their own conditions to meet their own requirements. NO RESPONSIBILITY IS ACCEPTED, EXCEPT FOR THOSE NON EXCLUDABLE CONDITIONS OR ANY TERRITORY, STATE OR FEDERAL LAW. Tuff Coat Australia liability is limited at its discretion to the replacement of this product or to the supply of similar product or to the refund of the original purchase cost of this product only. Tuff Coat Australia coating range of urethanes, sealer, solvents, thinners and additives are manufactured as for their purpose as per the product label. If consumers see advantage for Tuff Coat Australia products to be used for purposes other than as specified the consumer must make themselves satisfied as to the suitability and performance. No warranty other than implied as per original Tuff Coat Australia product label is expressed or valid.